# New Low Reflective High Precision Anti Scratch Ultra Thin Conductive ITO Glass for LCD-Display

> New Low Reflective High Precision Anti Scratch Ultra Thin Conductive ITO Glass for LCD-Display — an ITO-coated glass: Soda-Lime Glass / Borosilicate…

- Page: https://machiningglass.com/products/new-low-reflective-high-precision-anti-scratch-ultra-thin-conductive-ito-glass-for-lcd-display/
- SKU: MG-7BA32C
- Category: ITO / FTO Conductive Glass > ITO-Coated Glass & Substrates
- Image: https://machiningglass.com/wp-content/uploads/2026/10/New-Low-Reflective-High-Precision-Anti-Scratch-Ultra-Thin-Conductive-ITO-Glass-for-LCD-Display.webp
- Updated: 2026-10-24

Application: Touch Panels, LCD, OLED, Solar Cells, Electrochrom. Model: 1 ITO Coating Glass.

## Overview

The New Low Reflective High Precision Anti Scratch Ultra Thin Conductive ITO Glass for LCD-Display is supplied as an ITO-coated glass made from Soda-Lime Glass / Borosilicate Glass. Listed geometry: size 1600×1200mm (Customized), thickness 1.1mm (0.4-5mm Available). Optical / electrical data: transmittance ≥ 85%, sheet resistance 10 ω/Sq (5-100 ω/Sq Available). Coating: Indium Tin Oxide (ITO), Magnetron Sputtered. It is used in Touch Panels, LCD, OLED, Solar Cells and Electrochrom. Dimensions, material grade, coating and finish can be quoted to your drawing; the values above are the listed starting point.

## Specifications

| Parameter | Value |
| --- | --- |
| Substrate | Soda-Lime Glass / Borosilicate Glass |
| Coating | Indium Tin Oxide (ITO), Magnetron Sputtered |
| Application | Touch Panels, LCD, OLED, Solar Cells, Electrochrom |
| Model NO. | 1 ITO Coating Glass |
| Glass Type | ITO Conductive Glass (Transparent Conductive Oxid |
| Sheet Resistance | 10 ω/Sq (5-100 ω/Sq Available) |
| Glass Thickness | 1.1mm (0.4-5mm Available) |
| Visible Light Transmittance | ≥ 85% |
| Max Size | 1600×1200mm (Customized) |
| Film Thickness | 20-300nm |
| Supplier | Huizhou Kariho Glass Co.,Ltd |

## Technical data

| Parameter | Value |
| --- | --- |
| Item | Specification |
| Coating | ITO (indium tin oxide) / FTO (fluorine-doped tin oxide) |
| Deposition | Magnetron sputtering |
| Sheet resistance | 5-100 ohm/sq (customizable: 7-10 / 15-20 / 30-60 / 80-100) |
| Transmittance | >= 83% (at 10 ohm/sq) |
| Substrate | Soda-lime glass / borosilicate glass |
| Thickness | 0.55 / 0.7 / 1.1 / 2.0 mm |
| Type | Plain ITO / Patterned (etched) ITO / FTO |
| Patterning | Custom circuit design, photolithography and etching |
| QC | Four-point probe resistance test, optical transmittance measurement |
| Compliance | RoHS, REACH, HF; ISO9001 / ISO14001 certified plant |

## What to specify when you request a quote

- **Sheet resistance** — listed as “10 ω/Sq (5-100 ω/Sq Available)”; state the target sheet resistance and its tolerance.
- **Transmittance** — listed as “≥ 85%”; give the minimum visible transmission at the resistance you need.
- **Substrate and thickness** — listed as “Soda-Lime Glass / Borosilicate Glass”; name the base glass (soda-lime, borosilicate, alkali-free, quartz) and thickness.
- **Size and cutting** — listed as “1600×1200mm (Customized)”; give the cut size and whether edges are seamed.
- **Pattern or electrodes** — send a drawing for any etched pattern, bus bar or electrode.

## Engineering guides for this part

For material grades and coating options, see [ITO Coated Glass Material Options for Optoelectronic Components](https://machiningglass.com/materials/ito-coated-glass-material-options-for-optoelectronic-components/). How parts like this are machined and finished is covered in [ITO Coating Process: How Conductive Glass is Made for Optoelectronics](https://machiningglass.com/capabilities/ito-coating-process-how-conductive-glass-is-made-for-optoelectronics/). For an application example, read [Integrating ITO Coated Glass into Appliance Sensor Interfaces](https://machiningglass.com/applications/integrating-ito-coated-glass-into-appliance-sensor-interfaces/). Before sending a drawing, check [Precision Glass Material Selection: Fused Silica vs Borosilicate & More](https://machiningglass.com/resources/precision-glass-material-selection-fused-silica-vs-borosilicate-more/). A related standard product is [Custom ITO Coating Glass](https://machiningglass.com/products/custom-ito-coating-glass/).

## FAQ

### What is the New Low Reflective High Precision Anti Scratch Ultra Thin Conductive ITO Glass for LCD-Display made of?

It is listed as Soda-Lime Glass / Borosilicate Glass. Coating: Indium Tin Oxide (ITO), Magnetron Sputtered. Other grades can be quoted if your application needs different transmission, thermal or chemical properties.

### What sizes and thicknesses are available?

The listing gives size 1600×1200mm (Customized), thickness 1.1mm (0.4-5mm Available). Custom outlines and thicknesses are made to drawing; state the tolerance you need.

### What optical or electrical performance does it have?

Listed values: transmittance ≥ 85%, sheet resistance 10 ω/Sq (5-100 ω/Sq Available). Confirm the values at your operating wavelength, angle and temperature when you request a quote.

### Where is this ITO-coated glass used?

Listed applications: Touch Panels, LCD, OLED, Solar Cells and Electrochrom.

### What should I include in a quote request?

Include sheet resistance, transmittance, substrate and thickness, size and cutting and pattern or electrodes, plus quantity and a drawing if the part is custom.

## Request a quote

Send drawings, tolerances and quantity: https://machiningglass.com/contact/?rfq_product_id=8179#mg-rfq

---
Source: Custom Precision Glass Machining — https://machiningglass.com/