Appliance Indicator Window Glass – IR-transmissive black print, windows to +/-0.1 mm. No minimum order; DFM review included with every RFQ.
appliance indicator window glass lives a hard life: LED indicator and IR-remote windows. The build that survives it is IR-transmissive black print, windows to +/-0.1 mm.
Specifications at a glance
| Operating environment | LED indicator and IR-remote windows |
|---|---|
| Typical build | IR-transmissive black print, windows to +/-0.1 mm |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Design guidance
Before sending the RFQ, check these against your drawing:
- Print and strengthening interact: ion exchange happens before printing, thermal tempering after cutting – the build order is part of the spec.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Where these parts end up
appliance indicator window glass shows up across semiconductor equipment (view ports, wafer carriers, plasma rings, chamber windows); ccd inspection equipment (CCD cover plates, reference grids, stage glass); oled packaging (cover lids, frit-seal frames, fill-port plates).
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Related reading on this site: glass wafer bonding, holes and edges design guide, material selection guide.
Buyer questions, answered
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What conditions must appliance indicator window glass survive?
LED indicator and IR-remote windows. The standard build is IR-transmissive black print, windows to +/-0.1 mm.
Is there a minimum order for appliance indicator window glass?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
Specifications on this page were last reviewed by our engineering team in September 2026.