Fused Silica for Machine Vision: Fused Silica (CTE 0.55 x 10^-6 /K, 185 nm – 2.5 um). Single-piece prototypes to production volumes, quoted from your drawing.
fused silica for machine vision programs need flat, coated protection windows that do not distort imaging. Fused Silica is the fit here because it offers near-zero thermal expansion. Typical parts: camera windows, ring-light diffusers, calibration plates.
Specifications at a glance
| Material | Fused Silica (JGS1 (UV), JGS2 (standard), JGS3 (IR)) |
|---|---|
| Thermal expansion (CTE) | 0.55 x 10^-6 /K |
| Service temperature | 1,100 C continuous |
| Transmission range | 185 nm – 2.5 um |
| Density | 2.20 g/cm3 |
| Knoop hardness | 500 kg/mm2 |
| Refractive index | 1.458 @ 587 nm |
| Stock thickness | 0.10 – 50 mm |
| Maximum blank size | 450 x 450 mm |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Capabilities and limits
One material, many routes: on Fused Silica we also quote grinding, cnc machining, ultrasonic machining, polishing, and multi-step drawings are the norm rather than the exception.
Design guidance
Before sending the RFQ, check these against your drawing:
- Material note: its hardness and brittleness demand diamond tooling and controlled feeds.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Application context
fused silica for machine vision shows up across laser systems (windows, beam splitters, debris shields); scientific instruments (reference flats, cells, prism mounts, stage inserts); aerospace optics (sensor windows, star-tracker flats, radiation-tolerant ports). Background reading on the underlying material science: RP Photonics: fused silica.
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
Useful companion pages: wafer dicing process, material selection guide, glass in laser systems.
Common questions
How does Fused Silica behave under heat?
CTE is 0.55 x 10^-6 /K and continuous service reaches 1,100 C continuous, which is what drives its use where near-zero thermal expansion matters.
What do machine vision programs usually order?
Camera windows, ring-light diffusers, calibration plates. Typical spec: TWD < lambda/4, AR both faces.
Is there a minimum order for fused silica for machine vision?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Specifications on this page were last reviewed by our engineering team in August 2026.