Quick answer: JGS1 Quartz Glass Machining Services covers JGS1 Quartz Glass (CTE 0.55 x 10^-6 /K, 185 nm – 2.5 um (UV grade)). Prototypes ship in 5-10 working days.
When a drawing calls out JGS1 Quartz Glass, three numbers matter before any machining starts: CTE of 0.55 x 10^-6 /K, service temperature to 1,100 C continuous, and a transmission window of 185 nm – 2.5 um (UV grade). jgs1 quartz glass machining services here begin with those numbers and end with dimensional reports.
The numbers
| Material | JGS1 Quartz Glass (UV-grade synthetic, bubble class 0) |
|---|---|
| Thermal expansion (CTE) | 0.55 x 10^-6 /K |
| Service temperature | 1,100 C continuous |
| Transmission range | 185 nm – 2.5 um (UV grade) |
| Density | 2.20 g/cm3 |
| Knoop hardness | 500 kg/mm2 |
| Refractive index | 1.458 @ 587 nm |
| Stock thickness | 0.10 – 30 mm |
| Maximum blank size | 300 mm diameter |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Getting the drawing right
Three items decide most of the cost and lead time on this work:
- Material note: UV-grade surfaces must be polished without subsurface damage that scatters below 250 nm.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Process window
Beyond this page, JGS1 Quartz Glass routinely runs through ultrasonic machining, etching, double-side polishing, polishing in our shop – most real parts combine two or three of these steps.
Typical applications
Orders for jgs1 quartz glass machining services cluster in laser systems (windows, beam splitters, debris shields); aerospace optics (sensor windows, star-tracker flats, radiation-tolerant ports). Background reading on the underlying material science: RP Photonics: fused silica.
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
Useful companion pages: JGS1 quartz glass, fused silica wafers 2-12 inch, ultra-thin quartz discs.
Frequently asked questions
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What tolerances are achievable on JGS1 Quartz Glass parts?
Ground features hold +/-0.01 mm and lapped thickness reaches +/-0.003 mm. UV-grade surfaces must be polished without subsurface damage that scatters below 250 nm.
What thickness range do you stock for JGS1 Quartz Glass?
Standard stock spans 0.10 – 30 mm, with blanks up to 300 mm diameter. Other formats are sourced per order.
Specifications on this page were last reviewed by our engineering team in August 2026.