JGS2 Quartz Glass Glass Wafers – JGS2 Quartz Glass (CTE 0.55 x 10^-6 /K, 220 nm – 2.5 um). No minimum order; DFM review included with every RFQ.
A wafer is a specification bundle, not just a disc. jgs2 quartz glass glass wafers here mean Optical grade, bubble class 1 material with certified CTE of 0.55 x 10^-6 /K, TTV controlled per format, and edges profiled for handler compatibility.
The numbers
| Material | JGS2 Quartz Glass (Optical grade, bubble class 1) |
|---|---|
| Thermal expansion (CTE) | 0.55 x 10^-6 /K |
| Service temperature | 1,100 C continuous |
| Transmission range | 220 nm – 2.5 um |
| Density | 2.20 g/cm3 |
| Knoop hardness | 500 kg/mm2 |
| Refractive index | 1.458 @ 587 nm |
| Stock thickness | 0.20 – 40 mm |
| Maximum blank size | 300 mm diameter |
| Wafer formats | 2", 3", 4", 6", 8" and 12" with SEMI flats or notch |
| TTV | under 3 – 5 um by format |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Specification advice
The shop-floor rules that matter here:
- Material note: thicker blanks need stress-relief annealing before tight-flatness grinding.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Capabilities and limits
One material, many routes: on JGS2 Quartz Glass we also quote sandblasting, drilling, etching, lapping, and multi-step drawings are the norm rather than the exception.
Where these parts end up
The recurring buyers of jgs2 quartz glass glass wafers: laser systems (windows, beam splitters, debris shields); mems devices (cap wafers, TGV substrates, motion-sensor lids); industrial displays (touch covers, gauge windows, printed bezels). Background reading on the underlying material science: ScienceDirect: fused quartz.
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Related reading on this site: fused silica wafers 2-12 inch, precision glass grinding, alkali-free display glass.
Common questions
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What tolerances are achievable on JGS2 Quartz Glass parts?
Ground features hold +/-0.01 mm and lapped thickness reaches +/-0.003 mm. Thicker blanks need stress-relief annealing before tight-flatness grinding.
Specifications on this page were last reviewed by our engineering team in September 2026.