Precision Glass for OLED Packaging – custom precision glass machined to drawing with inspection reports. No minimum order; DFM review included with every RFQ.
precision glass for oled packaging programs need alkali-free thin lids with hermetic-bond edges. Typical parts: cover lids, frit-seal frames, fill-port plates.
Specification envelope
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
|---|
Design guidance
The shop-floor rules that matter here:
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Where these parts end up
precision glass for oled packaging shows up across led packaging (groove covers, phosphor carriers, package windows); optical sensors (sensor windows, filter caps, lens covers); medical diagnostics (flow cells, slides, microplate bottoms, cuvette windows).
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Related reading on this site: etched LED/OLED covers, precision glass grinding, microfluidic glass applications.
Common questions
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What do oled packaging programs usually order?
Cover lids, frit-seal frames, fill-port plates. Typical spec: thickness to 0.1 mm, edge chips < 20 um.
Specifications on this page were last reviewed by our engineering team in August 2026.