Quartz Glass With Blind Holes: Quartz Glass (CTE 0.59 x 10^-6 /K, 260 nm – 2.5 um); depth control +/-0.05 mm, flat or radiused bottom. Single-piece prototypes to production volumes, quoted from your drawing.
Buyers come to quartz glass with blind holes with two kinds of parts: catalog-adjacent blanks that need accurate finishing, and genuinely custom geometry. We quote both from the same dataset – GE214-equivalent, semiconductor grade stock in 0.20 – 60 mm, blanks to 450 mm diameter.
The numbers
| Material | Quartz Glass (GE214-equivalent, semiconductor grade) |
|---|---|
| Thermal expansion (CTE) | 0.59 x 10^-6 /K |
| Service temperature | 1,050 C continuous |
| Transmission range | 260 nm – 2.5 um |
| Density | 2.20 g/cm3 |
| Knoop hardness | 500 kg/mm2 |
| Refractive index | 1.459 @ 587 nm |
| Stock thickness | 0.20 – 60 mm |
| Maximum blank size | 450 mm diameter |
| Feature | Blind Holes |
| Capability | depth control +/-0.05 mm, flat or radiused bottom |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Getting the drawing right
Three items decide most of the cost and lead time on this work:
- Material note: natural-quartz batches vary in metallic ppm, so semiconductor lots need certs per melt.
- Feature rule: leave at least 30% of thickness under the bottom.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Capabilities and limits
One material, many routes: on Quartz Glass we also quote etching, sandblasting, polishing, lapping, and multi-step drawings are the norm rather than the exception.
These features are produced by ultrasonic machining or cnc machining. Capability: depth control +/-0.05 mm, flat or radiused bottom. Design rule worth copying onto the drawing: leave at least 30% of thickness under the bottom.
Application context
Orders for quartz glass with blind holes cluster in semiconductor equipment (view ports, wafer carriers, plasma rings, chamber windows); laboratory instruments (cuvettes, sight glasses, stir-cell windows). Background reading on the underlying material science: ScienceDirect: quartz glass.
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Related reading on this site: JGS1 quartz glass, ultra-thin quartz discs, high-purity quartz guide.
Buyer questions, answered
Is there a minimum order for quartz glass with blind holes?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What tolerances are achievable on Quartz Glass parts?
Ground features hold +/-0.01 mm and lapped thickness reaches +/-0.003 mm. Natural-quartz batches vary in metallic ppm, so semiconductor lots need certs per melt.
Specifications on this page were last reviewed by our engineering team in September 2026.