Model: 360 Degree.
Overview
360 Degree Optical Prism for Trimble Total Station 360 Reflector is an optical prism made from Glass. Dimensions, material grade, coating and finish can be quoted to your drawing; the values above are the listed starting point.
Specifications
| Material | Glass |
|---|---|
| Connector | 10.5cm |
| Model NO. | 360 Degree |
| Dimension Tolerance | 0.0/-0.1mm |
| Vertical Lines | 2 |
| Horizontal Line | 4 |
| Accuracy | 2'' |
| Prism constant is | 0mm |
| Joint | 5/8" x11 female thread |
| Supplier | Jiangsu Bangjie Trading Co., Ltd. |
Technical data
| item | value |
|---|---|
| Warranty | 12 months |
| Place of Origin | China |
| Jiangsu | |
| Brand Name | no brand |
| Product name | 360 Degree Reflective Prism |
| Applicable | Surveying |
| Prism Constant | +2mm |
| Connector | 5/8 inch |
| Length of the connector | 10.5cm |
| Size | 12*10.5*10.5cm |
| Dimension Tolerance | 0.0/-0.1mm |
| Usage | Survey Tools |
| Surface Quality | 60/40 |
| Flatness | 1/4 Lambda |
What to specify when you request a quote
- Material — listed as “Glass”; name the glass or crystal.
- Geometry — listed as “0.0/-0.1mm”; give diameter, focal length or radii, angles and tolerances.
- Surface figure — quote surface figure (λ) and scratch-dig.
- Centring and edges — state centration and edge chamfer.
- Coating — list the band and reflectance or transmission target.
Engineering guides for this part
How parts like this are machined and finished is covered in Flat Glass Polishing Process for Precision Substrates. Before sending a drawing, check Design Guide for Holes, Slots, and Edges in Custom Glass Parts.
FAQ
What is the 360 Degree Optical Prism for Trimble Total Station 360 Reflector made of? expand_more
It is listed as Glass. Other grades can be quoted if your application needs different transmission, thermal or chemical properties.
What should I include in a quote request? expand_more
Include material, geometry, surface figure, centring and edges and coating, plus quantity and a drawing if the part is custom.
