Product type: Equilateral Prism. Application: Beam Dispersion, Beam Split. Model: OP.
Overview
60 Degree Optical Prism Optical Bk7 Glass Triangle Dispersion Equilateral Prism: an optical prism made from Glass. Listed geometry: equilateral prism shape. Typical applications: Medical Instrument. Dimensions, material grade, coating and finish can be quoted to your drawing; the values above are the listed starting point.
Specifications
| Material | Glass |
|---|---|
| Type | Equilateral Prism |
| Shape | Equilateral Prism |
| Application | Medical Instrument |
| Usage | Beam Dispersion, Beam Split |
| Model NO. | OP |
| Supplier | Shenyang Ebetter Optics Co., Ltd. |
Technical data
| Dimensional Tolerance | ±0.02mm |
|---|---|
| Angle Tolerance | ±1 Arc Seconds |
| Surface Flatness | λ/10 |
| Surface Quality | 20/10 or better |
| Material | BK7/quartz/sapphire/Ge/CaF2/ZnSe .etc |
| Clear aperture | >90% |
| Bevel | Protective bevel as needed |
| Coating | Custom |
What to specify when you request a quote
- Material — listed as “Glass”; name the glass or crystal.
- Geometry — give diameter, focal length or radii, angles and tolerances.
- Surface figure — quote surface figure (λ) and scratch-dig.
- Centring and edges — state centration and edge chamfer.
- Coating — list the band and reflectance or transmission target.
Engineering guides for this part
How parts like this are machined and finished is covered in Optical Glass Polishing for High Clarity Surfaces. Before sending a drawing, check Design Guide for Holes, Slots, and Edges in Custom Glass Parts.
FAQ
What is the 60 Degree Optical Prism Optical Bk7 Glass Triangle Dispersion Equilateral Prism made of? expand_more
It is listed as Glass. Other grades can be quoted if your application needs different transmission, thermal or chemical properties.
Where is this optical prism used? expand_more
Listed applications: Medical Instrument.
What should I include in a quote request? expand_more
Include material, geometry, surface figure, centring and edges and coating, plus quantity and a drawing if the part is custom.
