Quick answer: Laser Cutting JGS1 Quartz Glass covers JGS1 Quartz Glass (CTE 0.55 x 10^-6 /K, 185 nm – 2.5 um (UV grade)); Laser Cutting to +/-0.02 mm contour. Prototypes ship in 5-10 working days.
laser cutting jgs1 quartz glass is a materials problem before it is a machining problem. JGS1 Quartz Glass has deep-uv transmission to 185 nm and a Knoop hardness of 500 kg/mm2, so the laser cutting recipe – feeds, coolant, tooling – differs from what works on ordinary float glass. The line runs picosecond and CO2 laser stations with vision registration and holds +/-0.02 mm contour.
Key parameters
| Material | JGS1 Quartz Glass (UV-grade synthetic, bubble class 0) |
|---|---|
| Thermal expansion (CTE) | 0.55 x 10^-6 /K |
| Service temperature | 1,100 C continuous |
| Transmission range | 185 nm – 2.5 um (UV grade) |
| Density | 2.20 g/cm3 |
| Knoop hardness | 500 kg/mm2 |
| Refractive index | 1.458 @ 587 nm |
| Stock thickness | 0.10 – 30 mm |
| Maximum blank size | 300 mm diameter |
| Process | Laser Cutting |
| Working tolerance | +/-0.02 mm contour |
| Minimum feature | 0.10 mm hole diameter |
| Surface finish | sealed edge, chip-free |
| Thickness window | 0.03 – 6 mm |
| Edge condition | filamentation edge, optional post-polish |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Specification advice
Before sending the RFQ, check these against your drawing:
- Material note: UV-grade surfaces must be polished without subsurface damage that scatters below 250 nm.
- Process boundary: aspect ratio in a single pass tops out near 10:1; thicker sections shift to coring or ultrasonic work.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
What the process holds
Laser Cutting earns its place through chip-free free-form contours and dense hole arrays in thin and ultra-thin glass. Its boundary condition – aspect ratio in a single pass tops out near 10:1; thicker sections shift to coring or ultrasonic work – is the first thing our DFM review checks.
Beyond this page, JGS1 Quartz Glass routinely runs through ultrasonic machining, cnc machining, polishing, etching in our shop – most real parts combine two or three of these steps.
Where these parts end up
laser cutting jgs1 quartz glass shows up across laser systems (windows, beam splitters, debris shields); aerospace optics (sensor windows, star-tracker flats, radiation-tolerant ports). Background reading on the underlying material science: RP Photonics: fused silica.
Dimensions still moving? Configure this part live in the 3D builder below, or open the full custom glass machining 3D builder to start from a blank canvas.
Useful companion pages: JGS1 quartz glass, fused silica wafers 2-12 inch, glass wafer bonding.
Buyer questions, answered
What tolerances are achievable on JGS1 Quartz Glass parts?
Ground features hold +/-0.01 mm and lapped thickness reaches +/-0.003 mm. UV-grade surfaces must be polished without subsurface damage that scatters below 250 nm.
What thickness range do you stock for JGS1 Quartz Glass?
Standard stock spans 0.10 – 30 mm, with blanks up to 300 mm diameter. Other formats are sourced per order.
How does JGS1 Quartz Glass behave under heat?
CTE is 0.55 x 10^-6 /K and continuous service reaches 1,100 C continuous, which is what drives its use where deep-UV transmission to 185 nm matters.
What accuracy does laser cutting hold?
+/-0.02 mm contour with minimum features of 0.10 mm hole diameter. Aspect ratio in a single pass tops out near 10:1; thicker sections shift to coring or ultrasonic work.
Specifications on this page were last reviewed by our engineering team in July 2026.