Coffee Machine Display Glass: 0.7 – 1.1 mm strengthened, oleophobic option. Single-piece prototypes to production volumes, quoted from your drawing.
coffee machine display glass lives a hard life: steam, oils and daily wipe-downs. The build that survives it is 0.7 – 1.1 mm strengthened, oleophobic option.
The numbers
| Operating environment | steam, oils and daily wipe-downs |
|---|---|
| Typical build | 0.7 – 1.1 mm strengthened, oleophobic option |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
DFM notes from the shop floor
Before sending the RFQ, check these against your drawing:
- Print and strengthening interact: ion exchange happens before printing, thermal tempering after cutting – the build order is part of the spec.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Typical applications
coffee machine display glass shows up across machine vision (camera windows, ring-light diffusers, calibration plates); microfluidic devices (chips, manifolds, via plates, bonded stacks); laser systems (windows, beam splitters, debris shields).
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
For adjacent specifications, see tolerance design guide, glass-bottom microplates, AR optical windows.
Buyer questions, answered
Is there a minimum order for coffee machine display glass?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What conditions must coffee machine display glass survive?
Steam, oils and daily wipe-downs. The standard build is 0.7 – 1.1 mm strengthened, oleophobic option.
Specifications on this page were last reviewed by our engineering team in October 2026.