Microwave Control Panel Glass – tempered 2 – 3 mm, printed capacitive touch windows. No minimum order; DFM review included with every RFQ.
microwave control panel glass lives a hard life: RF field plus grease and cleaner exposure. The build that survives it is tempered 2 – 3 mm, printed capacitive touch windows.
Specification envelope
| Operating environment | RF field plus grease and cleaner exposure |
|---|---|
| Typical build | tempered 2 – 3 mm, printed capacitive touch windows |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Design guidance
The shop-floor rules that matter here:
- Print and strengthening interact: ion exchange happens before printing, thermal tempering after cutting – the build order is part of the spec.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Where these parts end up
Orders for microwave control panel glass cluster in laboratory instruments (cuvettes, sight glasses, stir-cell windows); aerospace optics (sensor windows, star-tracker flats, radiation-tolerant ports); ccd inspection equipment (CCD cover plates, reference grids, stage glass).
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
Useful companion pages: tolerance design guide, CNC machining capability, AR optical windows.
Buyer questions, answered
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What conditions must microwave control panel glass survive?
RF field plus grease and cleaner exposure. The standard build is tempered 2 – 3 mm, printed capacitive touch windows.
Is there a minimum order for microwave control panel glass?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
Specifications on this page were last reviewed by our engineering team in September 2026.