Borofloat 33 for Machine Vision – Borofloat 33 (CTE 3.25 x 10^-6 /K, 350 nm – 2.0 um). No minimum order; DFM review included with every RFQ.
borofloat 33 for machine vision programs need flat, coated protection windows that do not distort imaging. Borofloat 33 is the fit here because it offers float-glass flatness off the line. Typical parts: camera windows, ring-light diffusers, calibration plates.
Specifications at a glance
| Material | Borofloat 33 (SCHOTT float production, wafer grade) |
|---|---|
| Thermal expansion (CTE) | 3.25 x 10^-6 /K |
| Service temperature | 450 C continuous |
| Transmission range | 350 nm – 2.0 um |
| Density | 2.23 g/cm3 |
| Knoop hardness | 480 kg/mm2 |
| Refractive index | 1.471 @ 587 nm |
| Stock thickness | 0.70 – 25.4 mm |
| Maximum blank size | 500 x 500 mm |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Capabilities and limits
One material, many routes: on Borofloat 33 we also quote double-side polishing, edge grinding, etching, drilling, and multi-step drawings are the norm rather than the exception.
DFM notes from the shop floor
The shop-floor rules that matter here:
- Material note: float tin side must be tracked when parts see coating or bonding steps.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Who orders this
The recurring buyers of borofloat 33 for machine vision: optical sensors (sensor windows, filter caps, lens covers); led packaging (groove covers, phosphor carriers, package windows); mems devices (cap wafers, TGV substrates, motion-sensor lids). Background reading on the underlying material science: SCHOTT BOROFLOAT product page.
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Engineers scoping this work usually also review fused silica material guide, 4 inch Borofloat wafers, AR coating process.
Buyer questions, answered
Is there a minimum order for borofloat 33 for machine vision?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
Specifications on this page were last reviewed by our engineering team in September 2026.