Drilling JGS2 Quartz Glass – JGS2 Quartz Glass (CTE 0.55 x 10^-6 /K, 220 nm – 2.5 um); Drilling to +/-0.02 mm hole position. No minimum order; DFM review included with every RFQ.
The combination of JGS2 Quartz Glass and Drilling comes up constantly in RFQs for a reason – the material offers lower oh than jgs1, and Drilling is the right way to get accurate geometry into it. Expect +/-0.02 mm hole position and exit-chip controlled below 0.1 mm.
The numbers
| Material | JGS2 Quartz Glass (Optical grade, bubble class 1) |
|---|---|
| Thermal expansion (CTE) | 0.55 x 10^-6 /K |
| Service temperature | 1,100 C continuous |
| Transmission range | 220 nm – 2.5 um |
| Density | 2.20 g/cm3 |
| Knoop hardness | 500 kg/mm2 |
| Refractive index | 1.458 @ 587 nm |
| Stock thickness | 0.20 – 40 mm |
| Maximum blank size | 300 mm diameter |
| Process | Drilling |
| Working tolerance | +/-0.02 mm hole position |
| Minimum feature | 0.15 mm laser / 0.5 mm mechanical |
| Surface finish | exit-chip controlled below 0.1 mm |
| Thickness window | 0.1 – 30 mm |
| Edge condition | optional chamfered hole entry |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Design guidance
The shop-floor rules that matter here:
- Material note: thicker blanks need stress-relief annealing before tight-flatness grinding.
- Process boundary: hole-to-edge distance should stay above 1.5x thickness to protect strength.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Process window
Drilling earns its place through through-holes, blind holes and countersinks at densities beyond 1,000 holes per part. Its boundary condition – hole-to-edge distance should stay above 1.5x thickness to protect strength – is the first thing our DFM review checks.
Beyond this page, JGS2 Quartz Glass routinely runs through lapping, cnc machining, grinding, double-side polishing in our shop – most real parts combine two or three of these steps.
Who orders this
The recurring buyers of drilling jgs2 quartz glass: microfluidic devices (chips, manifolds, via plates, bonded stacks); mems devices (cap wafers, TGV substrates, motion-sensor lids); semiconductor equipment (view ports, wafer carriers, plasma rings, chamber windows). Background reading on the underlying material science: ScienceDirect: fused quartz.
The fastest route to a quote is geometry: use the 3D configurator below, or the site-wide custom glass machining 3D builder for fully custom parts.
Related reading on this site: precision glass drilling, fused silica wafers 2-12 inch, custom FTO glass.
Common questions
What tolerances are achievable on JGS2 Quartz Glass parts?
Ground features hold +/-0.01 mm and lapped thickness reaches +/-0.003 mm. Thicker blanks need stress-relief annealing before tight-flatness grinding.
What thickness range do you stock for JGS2 Quartz Glass?
Standard stock spans 0.20 – 40 mm, with blanks up to 300 mm diameter. Other formats are sourced per order.
How does JGS2 Quartz Glass behave under heat?
CTE is 0.55 x 10^-6 /K and continuous service reaches 1,100 C continuous, which is what drives its use where visible and near-IR clarity matters.
What accuracy does drilling hold?
+/-0.02 mm hole position with minimum features of 0.15 mm laser / 0.5 mm mechanical. Hole-to-edge distance should stay above 1.5x thickness to protect strength.
Specifications on this page were last reviewed by our engineering team in July 2026.