Laser Cutting JGS2 Quartz Glass: JGS2 Quartz Glass (CTE 0.55 x 10^-6 /K, 220 nm – 2.5 um); Laser Cutting to +/-0.02 mm contour. Single-piece prototypes to production volumes, quoted from your drawing.
laser cutting jgs2 quartz glass is a materials problem before it is a machining problem. JGS2 Quartz Glass has visible and near-ir clarity and a Knoop hardness of 500 kg/mm2, so the laser cutting recipe – feeds, coolant, tooling – differs from what works on ordinary float glass. The line runs picosecond and CO2 laser stations with vision registration and holds +/-0.02 mm contour.
Key parameters
| Material | JGS2 Quartz Glass (Optical grade, bubble class 1) |
|---|---|
| Thermal expansion (CTE) | 0.55 x 10^-6 /K |
| Service temperature | 1,100 C continuous |
| Transmission range | 220 nm – 2.5 um |
| Density | 2.20 g/cm3 |
| Knoop hardness | 500 kg/mm2 |
| Refractive index | 1.458 @ 587 nm |
| Stock thickness | 0.20 – 40 mm |
| Maximum blank size | 300 mm diameter |
| Process | Laser Cutting |
| Working tolerance | +/-0.02 mm contour |
| Minimum feature | 0.10 mm hole diameter |
| Surface finish | sealed edge, chip-free |
| Thickness window | 0.03 – 6 mm |
| Edge condition | filamentation edge, optional post-polish |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
DFM notes from the shop floor
Three items decide most of the cost and lead time on this work:
- Material note: thicker blanks need stress-relief annealing before tight-flatness grinding.
- Process boundary: aspect ratio in a single pass tops out near 10:1; thicker sections shift to coring or ultrasonic work.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Manufacturing capability
The core strength of Laser Cutting is chip-free free-form contours and dense hole arrays in thin and ultra-thin glass. The honest limit: aspect ratio in a single pass tops out near 10:1; thicker sections shift to coring or ultrasonic work. Both belong on the drawing before quoting, not after.
One material, many routes: on JGS2 Quartz Glass we also quote edge grinding, etching, polishing, dicing, and multi-step drawings are the norm rather than the exception.
Application context
laser cutting jgs2 quartz glass shows up across oled packaging (cover lids, frit-seal frames, fill-port plates); semiconductor equipment (view ports, wafer carriers, plasma rings, chamber windows); microfluidic devices (chips, manifolds, via plates, bonded stacks). Background reading on the underlying material science: ScienceDirect: fused quartz.
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
Useful companion pages: beam splitter glass, laser glass cutting, machining tolerance guide.
Buyer questions, answered
What equipment runs the laser cutting work?
Picosecond and CO2 laser stations with vision registration.
Is there a minimum order for laser cutting jgs2 quartz glass?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
Specifications on this page were last reviewed by our engineering team in August 2026.