Laser Beam Splitter Glass: R/T 50/50, 30/70, 10/90 at 45 degrees. Single-piece prototypes to production volumes, quoted from your drawing.
We supply laser beam splitter glass to R/T 50/50, 30/70, 10/90 at 45 degrees – and because we are a machining house first, non-standard outlines, notches and mounting holes are part of the normal order, not an exception.
The numbers
| Optical specification | R/T 50/50, 30/70, 10/90 at 45 degrees |
|---|---|
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Design guidance
Before sending the RFQ, check these against your drawing:
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Who orders this
The recurring buyers of laser beam splitter glass: ccd inspection equipment (CCD cover plates, reference grids, stage glass); aerospace optics (sensor windows, star-tracker flats, radiation-tolerant ports); industrial displays (touch covers, gauge windows, printed bezels).
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
For adjacent specifications, see beam splitter glass, glass in laser systems, 4 inch Borofloat wafers.
Buyer questions, answered
Is there a minimum order for laser beam splitter glass?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
Specifications on this page were last reviewed by our engineering team in September 2026.