Quartz Glass Machining Services – Quartz Glass (CTE 0.59 x 10^-6 /K, 260 nm – 2.5 um). No minimum order; DFM review included with every RFQ.
When a drawing calls out Quartz Glass, three numbers matter before any machining starts: CTE of 0.59 x 10^-6 /K, service temperature to 1,050 C continuous, and a transmission window of 260 nm – 2.5 um. quartz glass machining services here begin with those numbers and end with dimensional reports.
Key parameters
| Material | Quartz Glass (GE214-equivalent, semiconductor grade) |
|---|---|
| Thermal expansion (CTE) | 0.59 x 10^-6 /K |
| Service temperature | 1,050 C continuous |
| Transmission range | 260 nm – 2.5 um |
| Density | 2.20 g/cm3 |
| Knoop hardness | 500 kg/mm2 |
| Refractive index | 1.459 @ 587 nm |
| Stock thickness | 0.20 – 60 mm |
| Maximum blank size | 450 mm diameter |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
DFM notes from the shop floor
Three items decide most of the cost and lead time on this work:
- Material note: natural-quartz batches vary in metallic ppm, so semiconductor lots need certs per melt.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
What the process holds
Beyond this page, Quartz Glass routinely runs through ultrasonic machining, polishing, dicing, sandblasting in our shop – most real parts combine two or three of these steps.
Application context
quartz glass machining services shows up across semiconductor equipment (view ports, wafer carriers, plasma rings, chamber windows); laboratory instruments (cuvettes, sight glasses, stir-cell windows). Background reading on the underlying material science: ScienceDirect: quartz glass.
Dimensions still moving? Configure this part live in the 3D builder below, or open the full custom glass machining 3D builder to start from a blank canvas.
For adjacent specifications, see precision glass grinding, ultra-thin quartz discs, FTO conductive glass.
Common questions
What tolerances are achievable on Quartz Glass parts?
Ground features hold +/-0.01 mm and lapped thickness reaches +/-0.003 mm. Natural-quartz batches vary in metallic ppm, so semiconductor lots need certs per melt.
What thickness range do you stock for Quartz Glass?
Standard stock spans 0.20 – 60 mm, with blanks up to 450 mm diameter. Other formats are sourced per order.
How does Quartz Glass behave under heat?
CTE is 0.59 x 10^-6 /K and continuous service reaches 1,050 C continuous, which is what drives its use where fused from natural quartz crystal matters.
Is there a minimum order for quartz glass machining services?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
Specifications on this page were last reviewed by our engineering team in July 2026.