CNC Machining Quartz Glass – Quartz Glass (CTE 0.59 x 10^-6 /K, 260 nm – 2.5 um); CNC Machining to +/-0.01 mm positional. No minimum order; DFM review included with every RFQ.
Ask any process engineer what makes quartz glass difficult and the answer is specific: natural-quartz batches vary in metallic ppm, so semiconductor lots need certs per melt. Our cnc machining line is tooled around exactly that – 4-axis machining centers with diamond tooling and through-spindle coolant – holding +/-0.01 mm positional on parts from 0.5 – 50 mm thick.
Specification envelope
| Material | Quartz Glass (GE214-equivalent, semiconductor grade) |
|---|---|
| Thermal expansion (CTE) | 0.59 x 10^-6 /K |
| Service temperature | 1,050 C continuous |
| Transmission range | 260 nm – 2.5 um |
| Density | 2.20 g/cm3 |
| Knoop hardness | 500 kg/mm2 |
| Refractive index | 1.459 @ 587 nm |
| Stock thickness | 0.20 – 60 mm |
| Maximum blank size | 450 mm diameter |
| Process | CNC Machining |
| Working tolerance | +/-0.01 mm positional |
| Minimum feature | 0.4 mm slot width |
| Surface finish | Ra 0.4 um ground, optional polish |
| Thickness window | 0.5 – 50 mm |
| Edge condition | chamfered 0.1 – 0.5 mm as standard |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
What the process holds
CNC Machining earns its place through complex 3D geometry – pockets, steps, counterbores and compound edges in one setup. Its boundary condition – internal corners carry a minimum radius equal to the smallest practical tool, typically R0.5 mm – is the first thing our DFM review checks.
Beyond this page, Quartz Glass routinely runs through ultrasonic machining, etching, double-side polishing, grinding in our shop – most real parts combine two or three of these steps.
Specification advice
Three items decide most of the cost and lead time on this work:
- Material note: natural-quartz batches vary in metallic ppm, so semiconductor lots need certs per melt.
- Process boundary: internal corners carry a minimum radius equal to the smallest practical tool, typically R0.5 mm.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Application context
cnc machining quartz glass shows up across semiconductor equipment (view ports, wafer carriers, plasma rings, chamber windows); laboratory instruments (cuvettes, sight glasses, stir-cell windows). Background reading on the underlying material science: ScienceDirect: quartz glass.
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
For adjacent specifications, see high-temperature quartz windows, perforated quartz plates, custom ITO glass.
Frequently asked questions
What equipment runs the cnc machining work?
4-axis machining centers with diamond tooling and through-spindle coolant.
Is there a minimum order for cnc machining quartz glass?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
Specifications on this page were last reviewed by our engineering team in August 2026.