Mounted Bandpass Filters: CWL 200 – 1600 nm, FWHM from 1 nm, blocking OD4 – OD6. Single-piece prototypes to production volumes, quoted from your drawing.
mounted bandpass filters do one job: isolate one working band for a detector. Ours are built to CWL 200 – 1600 nm, FWHM from 1 nm, blocking OD4 – OD6 and cut, edged and mounted to whatever outline the housing needs.
Key parameters
| Optical specification | CWL 200 – 1600 nm, FWHM from 1 nm, blocking OD4 – OD6 |
|---|---|
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
DFM notes from the shop floor
The shop-floor rules that matter here:
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Application context
Orders for mounted bandpass filters cluster in industrial displays (touch covers, gauge windows, printed bezels); ccd inspection equipment (CCD cover plates, reference grids, stage glass); oled packaging (cover lids, frit-seal frames, fill-port plates).
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Related reading on this site: glass in laser systems, high-purity quartz guide, special-shaped glass plates.
Common questions
Is there a minimum order for mounted bandpass filters?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
Specifications on this page were last reviewed by our engineering team in September 2026.