D263 Thin Glass Glass Covers: D263 Thin Glass (CTE 7.2 x 10^-6 /K, 350 nm – 2.0 um); 0.1 – 3 mm thick, contours to drawing. Single-piece prototypes to production volumes, quoted from your drawing.
d263 thin glass glass covers are ordered for display, sensor and LED package covers. The geometry envelope is 0.1 – 3 mm thick, contours to drawing, held to outline +/-0.05 mm, in D263 Thin Glass.
Specification envelope
| Material | D263 Thin Glass (SCHOTT D 263 T eco) |
|---|---|
| Thermal expansion (CTE) | 7.2 x 10^-6 /K |
| Service temperature | 400 C (Tg 557 C) |
| Transmission range | 350 nm – 2.0 um |
| Density | 2.51 g/cm3 |
| Knoop hardness | 590 kg/mm2 |
| Refractive index | 1.523 @ 587 nm |
| Stock thickness | 0.03 – 1.1 mm |
| Maximum blank size | 440 x 360 mm |
| Geometry | Glass Covers |
| Size envelope | 0.1 – 3 mm thick, contours to drawing |
| Key tolerance | outline +/-0.05 mm |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Manufacturing capability
One material, many routes: on D263 Thin Glass we also quote cnc machining, drilling, polishing, etching, and multi-step drawings are the norm rather than the exception.
Production route: laser cutting, cnc machining, edge grinding – selected per geometry and volume. Edge condition: filamentation edge, optional post-polish.
Design guidance
Before sending the RFQ, check these against your drawing:
- Material note: ultra-thin stock cannot take conventional clamping; parts are machined on wax or UV-tape carriers.
- Hold the controlling dimension (outline +/-0.05 mm) and let secondary dimensions carry standard tolerance – it is the single biggest cost lever.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Typical applications
Orders for d263 thin glass glass covers cluster in medical diagnostics (flow cells, slides, microplate bottoms, cuvette windows); led packaging (groove covers, phosphor carriers, package windows); oled packaging (cover lids, frit-seal frames, fill-port plates). Background reading on the underlying material science: SCHOTT D 263 thin glass.
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Engineers scoping this work usually also review custom ITO glass, Borofloat 33 selection guide, CCD screening plates.
Common questions
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What tolerances are achievable on D263 Thin Glass parts?
Ground features hold +/-0.01 mm and lapped thickness reaches +/-0.003 mm. Ultra-thin stock cannot take conventional clamping; parts are machined on wax or UV-tape carriers.
What thickness range do you stock for D263 Thin Glass?
Standard stock spans 0.03 – 1.1 mm, with blanks up to 440 x 360 mm. Other formats are sourced per order.
How does D263 Thin Glass behave under heat?
CTE is 7.2 x 10^-6 /K and continuous service reaches 400 C (Tg 557 C), which is what drives its use where down-drawn fire-polished surfaces matters.
Specifications on this page were last reviewed by our engineering team in October 2026.