Quick answer: FTO Coating Glass covers 7 – 15 ohm/sq, stable to 600 C. Prototypes ship in 5-10 working days.
Specify fto coating glass when the bare substrate falls short: fluorine-doped tin oxide, processed by spray pyrolysis on float line, brings the substrate you specify to 7 – 15 ohm/sq, stable to 600 C.
Specifications at a glance
| Treatment | FTO Coating – fluorine-doped tin oxide |
|---|---|
| Specification | 7 – 15 ohm/sq, stable to 600 C |
| Deposition / method | spray pyrolysis on float line |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Design guidance
Three items decide most of the cost and lead time on this work:
- Sequence matters: all machining happens before fto coating; post-coating rework is not economical.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Where these parts end up
Orders for fto coating glass cluster in led packaging (groove covers, phosphor carriers, package windows); optical sensors (sensor windows, filter caps, lens covers); medical diagnostics (flow cells, slides, microplate bottoms, cuvette windows). Background reading on the underlying material science: ScienceDirect: FTO.
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
Useful companion pages: FTO conductive glass, custom FTO glass, ultra-thin glass materials.
Common questions
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What does fto coating add?
Heat-tolerant conductive layer for cells and heaters. Applied by spray pyrolysis on float line to 7 – 15 ohm/sq, stable to 600 C.
Specifications on this page were last reviewed by our engineering team in August 2026.
