Soda-Lime Glass Special-Shaped Glass: Soda-Lime Glass (CTE 9.0 x 10^-6 /K, 360 nm – 2.0 um); Any DXF/STEP outline within 600 x 400 mm. Single-piece prototypes to production volumes, quoted from your drawing.
A drawing for soda-lime glass special-shaped glass is mostly a conversation about edges and datums. We produce them in Soda-Lime Glass at Any DXF/STEP outline within 600 x 400 mm, with contour +/-0.05 mm as the controlling tolerance, and finish the perimeter per spec.
Key parameters
| Material | Soda-Lime Glass (Float per ASTM C1036, low-iron option) |
|---|---|
| Thermal expansion (CTE) | 9.0 x 10^-6 /K |
| Service temperature | 350 C continuous |
| Transmission range | 360 nm – 2.0 um |
| Density | 2.50 g/cm3 |
| Knoop hardness | 585 kg/mm2 |
| Refractive index | 1.52 @ 587 nm |
| Stock thickness | 0.40 – 19 mm |
| Maximum blank size | 1,000 x 800 mm |
| Geometry | Special-Shaped Glass |
| Size envelope | Any DXF/STEP outline within 600 x 400 mm |
| Key tolerance | contour +/-0.05 mm |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Getting the drawing right
The shop-floor rules that matter here:
- Material note: higher CTE means edge chips propagate under thermal load, so edge finishing quality drives reliability.
- Hold the controlling dimension (contour +/-0.05 mm) and let secondary dimensions carry standard tolerance – it is the single biggest cost lever.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Capabilities and limits
One material, many routes: on Soda-Lime Glass we also quote sandblasting, cnc machining, laser cutting, dicing, and multi-step drawings are the norm rather than the exception.
Production route: cnc machining, laser cutting, edge grinding – selected per geometry and volume. Edge condition: chamfered 0.1 – 0.5 mm as standard.
Where these parts end up
The recurring buyers of soda-lime glass special-shaped glass: led packaging (groove covers, phosphor carriers, package windows); industrial displays (touch covers, gauge windows, printed bezels). Background reading on the underlying material science: ASTM C1036 flat glass standard.
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Related reading on this site: special-shaped glass plates, AR coating process, perforated quartz plates.
Common questions
How does Soda-Lime Glass behave under heat?
CTE is 9.0 x 10^-6 /K and continuous service reaches 350 C continuous, which is what drives its use where lowest cost per square meter matters.
What sizes are available for special-shaped glass?
Any DXF/STEP outline within 600 x 400 mm, held to contour +/-0.05 mm.
Is there a minimum order for soda-lime glass special-shaped glass?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
Specifications on this page were last reviewed by our engineering team in August 2026.