Range Hood Control Panel Glass – tempered 3 – 4 mm, matte-etched anti-fingerprint face. No minimum order; DFM review included with every RFQ.
Appliance OEMs specify range hood control panel glass against two documents – the industrial design rendering and the reliability test plan. Between them sits the glass build: tempered 3 – 4 mm, matte-etched anti-fingerprint face, engineered for grease aerosols and 60 C rising heat.
Key parameters
| Operating environment | grease aerosols and 60 C rising heat |
|---|---|
| Typical build | tempered 3 – 4 mm, matte-etched anti-fingerprint face |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Getting the drawing right
Three items decide most of the cost and lead time on this work:
- Print and strengthening interact: ion exchange happens before printing, thermal tempering after cutting – the build order is part of the spec.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Application context
The recurring buyers of range hood control panel glass: mems devices (cap wafers, TGV substrates, motion-sensor lids); optical sensors (sensor windows, filter caps, lens covers); machine vision (camera windows, ring-light diffusers, calibration plates).
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
Useful companion pages: fused silica wafers 2-12 inch, laser glass cutting, etched LED/OLED covers.
Frequently asked questions
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What conditions must range hood control panel glass survive?
Grease aerosols and 60 C rising heat. The standard build is tempered 3 – 4 mm, matte-etched anti-fingerprint face.
Is there a minimum order for range hood control panel glass?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Specifications on this page were last reviewed by our engineering team in September 2026.