Edge Grinding Alkali-Free Glass – Alkali-Free Glass (CTE 3.2 x 10^-6 /K, 350 nm – 2.0 um); Edge Grinding to chamfer +/-0.05 mm. No minimum order; DFM review included with every RFQ.
The combination of Alkali-Free Glass and Edge Grinding comes up constantly in RFQs for a reason – the material offers display-grade surface quality, and Edge Grinding is the right way to get accurate geometry into it. Expect chamfer +/-0.05 mm and ground C or R profile, polish option.
The numbers
| Material | Alkali-Free Glass (AF32 / EAGLE-class display glass) |
|---|---|
| Thermal expansion (CTE) | 3.2 x 10^-6 /K |
| Service temperature | 600 C (Tg 717 C) |
| Transmission range | 350 nm – 2.0 um |
| Density | 2.43 g/cm3 |
| Knoop hardness | 590 kg/mm2 |
| Refractive index | 1.51 @ 587 nm |
| Stock thickness | 0.10 – 1.1 mm |
| Maximum blank size | 400 x 300 mm |
| Process | Edge Grinding |
| Working tolerance | chamfer +/-0.05 mm |
| Minimum feature | 0.1 mm chamfer leg |
| Surface finish | ground C or R profile, polish option |
| Thickness window | 0.1 – 25 mm |
| Edge condition | C-chamfer, R-round, pencil or OG profile |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Getting the drawing right
Before sending the RFQ, check these against your drawing:
- Material note: thin sheets below 0.3 mm demand carrier-supported handling through every step.
- Process boundary: profiles below 0.1 mm leg length are lapped by hand and priced per edge.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
What the process holds
Edge Grinding earns its place through edge strength – a finished chamfer roughly doubles the bend strength of a cut edge. Its boundary condition – profiles below 0.1 mm leg length are lapped by hand and priced per edge – is the first thing our DFM review checks.
Beyond this page, Alkali-Free Glass routinely runs through dicing, laser cutting, etching, cnc machining in our shop – most real parts combine two or three of these steps.
Application context
Orders for edge grinding alkali-free glass cluster in industrial displays (touch covers, gauge windows, printed bezels); mems devices (cap wafers, TGV substrates, motion-sensor lids); ccd inspection equipment (CCD cover plates, reference grids, stage glass). Background reading on the underlying material science: SCHOTT AF 32 eco.
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Engineers scoping this work usually also review holes and edges design guide, alkali-free display glass, edge grinding overview.
Frequently asked questions
What equipment runs the edge grinding work?
CNC edge grinders with profiled diamond wheels.
Is there a minimum order for edge grinding alkali-free glass?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
Specifications on this page were last reviewed by our engineering team in September 2026.