Glass With Beveled Edges – bevel angle 30 – 60 degrees, face width to 5 mm. No minimum order; DFM review included with every RFQ.
glass with beveled edges – manufactured to drawing with documented tolerances, from single prototypes to production.
The numbers
| Feature | Beveled Edges |
|---|---|
| Capability | bevel angle 30 – 60 degrees, face width to 5 mm |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Specification advice
The shop-floor rules that matter here:
- Feature rule: polished bevels double as light-guide entry faces.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
What the process holds
These features are produced by edge grinding or polishing. Capability: bevel angle 30 – 60 degrees, face width to 5 mm. Design rule worth copying onto the drawing: polished bevels double as light-guide entry faces.
Application context
glass with beveled edges shows up across optical sensors (sensor windows, filter caps, lens covers); semiconductor equipment (view ports, wafer carriers, plasma rings, chamber windows); ccd inspection equipment (CCD cover plates, reference grids, stage glass).
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
Useful companion pages: fused silica wafers 2-12 inch, glass sandblasting, etched LED/OLED covers.
Common questions
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What is the design rule for beveled edges?
Polished bevels double as light-guide entry faces.
Is there a minimum order for glass with beveled edges?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Specifications on this page were last reviewed by our engineering team in September 2026.