Quick answer: Glass With Chamfered Holes covers 0.1 – 0.5 mm chamfer legs both sides. Prototypes ship in 5-10 working days.
glass with chamfered holes – manufactured to drawing with documented tolerances, from single prototypes to production.
Specifications at a glance
| Feature | Chamfered Holes |
|---|---|
| Capability | 0.1 – 0.5 mm chamfer legs both sides |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Process window
These features are produced by drilling or edge grinding. Capability: 0.1 – 0.5 mm chamfer legs both sides. Design rule worth copying onto the drawing: chamfers stop hole-edge chips from propagating.
Design guidance
The shop-floor rules that matter here:
- Feature rule: chamfers stop hole-edge chips from propagating.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
The full rules live in our tolerance design guide and holes and edges design guide.
Typical applications
glass with chamfered holes shows up across industrial displays (touch covers, gauge windows, printed bezels); microfluidic devices (chips, manifolds, via plates, bonded stacks); optical sensors (sensor windows, filter caps, lens covers).
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Related reading on this site: beam splitter glass, holes and edges design guide, ITO coated glass.
Buyer questions, answered
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What is the design rule for chamfered holes?
Chamfers stop hole-edge chips from propagating.
Is there a minimum order for glass with chamfered holes?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
Specifications on this page were last reviewed by our engineering team in August 2026.