Quick answer: Hydrophobic Coating Soda-Lime Glass covers Soda-Lime Glass (CTE 9.0 x 10^-6 /K, 360 nm – 2.0 um); water contact angle > 110 degrees. Prototypes ship in 5-10 working days.
hydrophobic coating soda-lime glass is fluorosilane easy-clean layer applied by vapor-phase silanization. On Soda-Lime Glass it sheds water and fingerprints on touch faces – the specification we run to is water contact angle > 110 degrees.
Specification envelope
| Material | Soda-Lime Glass (Float per ASTM C1036, low-iron option) |
|---|---|
| Thermal expansion (CTE) | 9.0 x 10^-6 /K |
| Service temperature | 350 C continuous |
| Transmission range | 360 nm – 2.0 um |
| Density | 2.50 g/cm3 |
| Knoop hardness | 585 kg/mm2 |
| Refractive index | 1.52 @ 587 nm |
| Stock thickness | 0.40 – 19 mm |
| Maximum blank size | 1,000 x 800 mm |
| Treatment | Hydrophobic Coating – fluorosilane easy-clean layer |
| Specification | water contact angle > 110 degrees |
| Deposition / method | vapor-phase silanization |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Capabilities and limits
One material, many routes: on Soda-Lime Glass we also quote drilling, etching, edge grinding, cnc machining, and multi-step drawings are the norm rather than the exception.
Getting the drawing right
Before sending the RFQ, check these against your drawing:
- Material note: higher CTE means edge chips propagate under thermal load, so edge finishing quality drives reliability.
- Sequence matters: all machining happens before hydrophobic coating; post-coating rework is not economical.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Application context
The recurring buyers of hydrophobic coating soda-lime glass: led packaging (groove covers, phosphor carriers, package windows); industrial displays (touch covers, gauge windows, printed bezels). Background reading on the underlying material science: ASTM C1036 flat glass standard.
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
For adjacent specifications, see custom FTO glass, laser glass cutting, optical glass options.
Buyer questions, answered
How does Soda-Lime Glass behave under heat?
CTE is 9.0 x 10^-6 /K and continuous service reaches 350 C continuous, which is what drives its use where lowest cost per square meter matters.
What does hydrophobic coating add?
Sheds water and fingerprints on touch faces. Applied by vapor-phase silanization to water contact angle > 110 degrees.
Is there a minimum order for hydrophobic coating soda-lime glass?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Specifications on this page were last reviewed by our engineering team in August 2026.