Hydrophobic Coating Glass: water contact angle > 110 degrees. Single-piece prototypes to production volumes, quoted from your drawing.
Specify hydrophobic coating glass when the bare substrate falls short: fluorosilane easy-clean layer, processed by vapor-phase silanization, brings the substrate you specify to water contact angle > 110 degrees.
Specifications at a glance
| Treatment | Hydrophobic Coating – fluorosilane easy-clean layer |
|---|---|
| Specification | water contact angle > 110 degrees |
| Deposition / method | vapor-phase silanization |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Specification advice
Three items decide most of the cost and lead time on this work:
- Sequence matters: all machining happens before hydrophobic coating; post-coating rework is not economical.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Typical applications
hydrophobic coating glass shows up across machine vision (camera windows, ring-light diffusers, calibration plates); laser systems (windows, beam splitters, debris shields); industrial displays (touch covers, gauge windows, printed bezels). Background reading on the underlying material science: ScienceDirect: hydrophobic coating.
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Related reading on this site: FTO conductive glass, surface quality guide, glass hole micromachining.
Frequently asked questions
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What does hydrophobic coating add?
Sheds water and fingerprints on touch faces. Applied by vapor-phase silanization to water contact angle > 110 degrees.
Is there a minimum order for hydrophobic coating glass?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
Specifications on this page were last reviewed by our engineering team in August 2026.