Quartz Glass With Beveled Edges – Quartz Glass (CTE 0.59 x 10^-6 /K, 260 nm – 2.5 um); bevel angle 30 – 60 degrees, face width to 5 mm. No minimum order; DFM review included with every RFQ.
Buyers come to quartz glass with beveled edges with two kinds of parts: catalog-adjacent blanks that need accurate finishing, and genuinely custom geometry. We quote both from the same dataset – GE214-equivalent, semiconductor grade stock in 0.20 – 60 mm, blanks to 450 mm diameter.
Specification envelope
| Material | Quartz Glass (GE214-equivalent, semiconductor grade) |
|---|---|
| Thermal expansion (CTE) | 0.59 x 10^-6 /K |
| Service temperature | 1,050 C continuous |
| Transmission range | 260 nm – 2.5 um |
| Density | 2.20 g/cm3 |
| Knoop hardness | 500 kg/mm2 |
| Refractive index | 1.459 @ 587 nm |
| Stock thickness | 0.20 – 60 mm |
| Maximum blank size | 450 mm diameter |
| Feature | Beveled Edges |
| Capability | bevel angle 30 – 60 degrees, face width to 5 mm |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Manufacturing capability
One material, many routes: on Quartz Glass we also quote polishing, grinding, drilling, dicing, and multi-step drawings are the norm rather than the exception.
These features are produced by edge grinding or polishing. Capability: bevel angle 30 – 60 degrees, face width to 5 mm. Design rule worth copying onto the drawing: polished bevels double as light-guide entry faces.
Getting the drawing right
Before sending the RFQ, check these against your drawing:
- Material note: natural-quartz batches vary in metallic ppm, so semiconductor lots need certs per melt.
- Feature rule: polished bevels double as light-guide entry faces.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Application context
Orders for quartz glass with beveled edges cluster in semiconductor equipment (view ports, wafer carriers, plasma rings, chamber windows); laboratory instruments (cuvettes, sight glasses, stir-cell windows). Background reading on the underlying material science: ScienceDirect: quartz glass.
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
For adjacent specifications, see high-temperature quartz windows, perforated quartz plates, precision glass drilling.
Buyer questions, answered
Is there a minimum order for quartz glass with beveled edges?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What tolerances are achievable on Quartz Glass parts?
Ground features hold +/-0.01 mm and lapped thickness reaches +/-0.003 mm. Natural-quartz batches vary in metallic ppm, so semiconductor lots need certs per melt.
Specifications on this page were last reviewed by our engineering team in September 2026.