shape

Soda-Lime Glass Glass Covers

Soda-Lime Glass Glass Covers: Soda-Lime Glass, CTE 9.0 x 10^-6 /K. No MOQ, prototypes in 5-10 days, DFM review with every RFQ.

Soda-Lime Glass Glass Covers

Soda-Lime Glass Glass Covers: Soda-Lime Glass (CTE 9.0 x 10^-6 /K, 360 nm – 2.0 um); 0.1 – 3 mm thick, contours to drawing. Single-piece prototypes to production volumes, quoted from your drawing.

soda-lime glass glass covers are ordered for display, sensor and LED package covers. The geometry envelope is 0.1 – 3 mm thick, contours to drawing, held to outline +/-0.05 mm, in Soda-Lime Glass.

The numbers

Material Soda-Lime Glass (Float per ASTM C1036, low-iron option)
Thermal expansion (CTE) 9.0 x 10^-6 /K
Service temperature 350 C continuous
Transmission range 360 nm – 2.0 um
Density 2.50 g/cm3
Knoop hardness 585 kg/mm2
Refractive index 1.52 @ 587 nm
Stock thickness 0.40 – 19 mm
Maximum blank size 1,000 x 800 mm
Geometry Glass Covers
Size envelope 0.1 – 3 mm thick, contours to drawing
Key tolerance outline +/-0.05 mm
RFQ inputs PDF/DXF/STEP drawing, quantity brackets, surface and edge spec

DFM notes from the shop floor

Three items decide most of the cost and lead time on this work:

  • Material note: higher CTE means edge chips propagate under thermal load, so edge finishing quality drives reliability.
  • Hold the controlling dimension (outline +/-0.05 mm) and let secondary dimensions carry standard tolerance – it is the single biggest cost lever.
  • Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.

The full rules live in our tolerance design guide and holes and edges design guide.

Capabilities and limits

One material, many routes: on Soda-Lime Glass we also quote drilling, lapping, etching, dicing, and multi-step drawings are the norm rather than the exception.

Production route: laser cutting, cnc machining, edge grinding – selected per geometry and volume. Edge condition: filamentation edge, optional post-polish.

Typical applications

soda-lime glass glass covers shows up across led packaging (groove covers, phosphor carriers, package windows); industrial displays (touch covers, gauge windows, printed bezels). Background reading on the underlying material science: ASTM C1036 flat glass standard.

Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.

Useful companion pages: custom microfluidic chip, ultra-thin quartz discs, perforated quartz plates.

Frequently asked questions

What files do you need for a quote?

A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.

Do parts ship with inspection data?

Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.

What tolerances are achievable on Soda-Lime Glass parts?

Ground features hold +/-0.01 mm and lapped thickness reaches +/-0.003 mm. Higher CTE means edge chips propagate under thermal load, so edge finishing quality drives reliability.

What thickness range do you stock for Soda-Lime Glass?

Standard stock spans 0.40 – 19 mm, with blanks up to 1,000 x 800 mm. Other formats are sourced per order.

How does Soda-Lime Glass behave under heat?

CTE is 9.0 x 10^-6 /K and continuous service reaches 350 C continuous, which is what drives its use where lowest cost per square meter matters.

Specifications on this page were last reviewed by our engineering team in October 2026.

Configure in 3D, draw in 2D

3D Model & 2D Drawing Builder

PRECISION GLASS 3D
3D Precision Glass Configurator Build a visual 3D preview for custom precision glass parts, including wafers, microfluidic chips, coated glass, optical filters, and machined quartz plates. This tool is for visual configuration only. Final dimensions, tolerances, materials, coatings, and manufacturability will be reviewed from your drawing or specification.
3D GLASS PREVIEW Visual Specification

LED / OLED Cover Glass Builder

Interactive visual preview for custom precision glass configuration.

SP SPEC SUMMARY:
Import Code (One-Click Recall)

Save this code before you leave — it is the only way to recall this exact model. If you lose it, your configuration cannot be restored.

SUBMIT RFQ — ENGINEERING REVIEW Your current 3D configuration and specification summary are attached automatically. Attach a drawing if you have one.
Arithmetic verification image

FREQUENTLY ASKED QUESTIONS
What machined features can be added to cover glass?

Edge grooves, a center cavity or an edge step for module packaging, each with adjustable width and depth. Functional coatings such as AR, anti-fingerprint, ITO or a black border print are also available.

Which edge finishes are supported?

As-cut, ground, polished or C-chamfer. The preview color-codes the edge and shows a double line for a C-chamfer.

Need a different product family? Open the full 3D + 2D builder.

Engineering Review

Ready to quote this part?

Send drawings and target performance data so engineering can review geometry, material and lead time.