Refrigerator Display Cover Glass: 0.7 – 2 mm strengthened, anti-fog option, OD4 print. Single-piece prototypes to production volumes, quoted from your drawing.
refrigerator display cover glass lives a hard life: condensation cycles and door-slam shock. The build that survives it is 0.7 – 2 mm strengthened, anti-fog option, OD4 print.
The numbers
| Operating environment | condensation cycles and door-slam shock |
|---|---|
| Typical build | 0.7 – 2 mm strengthened, anti-fog option, OD4 print |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Getting the drawing right
Before sending the RFQ, check these against your drawing:
- Print and strengthening interact: ion exchange happens before printing, thermal tempering after cutting – the build order is part of the spec.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Where these parts end up
refrigerator display cover glass shows up across led packaging (groove covers, phosphor carriers, package windows); aerospace optics (sensor windows, star-tracker flats, radiation-tolerant ports); semiconductor equipment (view ports, wafer carriers, plasma rings, chamber windows).
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Related reading on this site: fused silica wafer applications, edge grinding overview, BF33 microfluidic chip.
Frequently asked questions
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What conditions must refrigerator display cover glass survive?
Condensation cycles and door-slam shock. The standard build is 0.7 – 2 mm strengthened, anti-fog option, OD4 print.
Specifications on this page were last reviewed by our engineering team in August 2026.