Glass With Cavities: pockets with 5 um floor flatness available. Single-piece prototypes to production volumes, quoted from your drawing.
glass with cavities – manufactured to drawing with documented tolerances, from single prototypes to production.
Key parameters
| Feature | Cavities |
|---|---|
| Capability | pockets with 5 um floor flatness available |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Specification advice
Three items decide most of the cost and lead time on this work:
- Feature rule: corner radius R0.5 mm minimum for milled pockets.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Manufacturing capability
These features are produced by ultrasonic machining or etching or cnc machining. Capability: pockets with 5 um floor flatness available. Design rule worth copying onto the drawing: corner radius R0.5 mm minimum for milled pockets.
Typical applications
glass with cavities shows up across machine vision (camera windows, ring-light diffusers, calibration plates); medical diagnostics (flow cells, slides, microplate bottoms, cuvette windows); laboratory instruments (cuvettes, sight glasses, stir-cell windows).
Dimensions still moving? Configure this part live in the 3D + 2D builder below, or open the full custom glass machining 3D + 2D builder to start from a blank canvas.
Useful companion pages: high-purity quartz guide, machining tolerance guide, glass wafer bonding.
Frequently asked questions
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What is the design rule for cavities?
Corner radius R0.5 mm minimum for milled pockets.
Is there a minimum order for glass with cavities?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
Specifications on this page were last reviewed by our engineering team in August 2026.