Quick answer: Glass With Rounded Corners covers R0.5 – R50 mm, matched to drawing. Prototypes ship in 5-10 working days.
glass with rounded corners – manufactured to drawing with documented tolerances, from single prototypes to production.
The numbers
| Feature | Rounded Corners |
|---|---|
| Capability | R0.5 – R50 mm, matched to drawing |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Specification advice
Three items decide most of the cost and lead time on this work:
- Feature rule: R2 mm and larger survive handling far better than R0.5.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
What the process holds
These features are produced by cnc machining or edge grinding. Capability: R0.5 – R50 mm, matched to drawing. Design rule worth copying onto the drawing: R2 mm and larger survive handling far better than R0.5.
Typical applications
Orders for glass with rounded corners cluster in optical sensors (sensor windows, filter caps, lens covers); microfluidic devices (chips, manifolds, via plates, bonded stacks); semiconductor equipment (view ports, wafer carriers, plasma rings, chamber windows).
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Engineers scoping this work usually also review custom ITO glass, 4 inch Borofloat wafers, high-purity quartz guide.
Common questions
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What is the design rule for rounded corners?
R2 mm and larger survive handling far better than R0.5.
Is there a minimum order for glass with rounded corners?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
Specifications on this page were last reviewed by our engineering team in August 2026.