Quick answer: Etched Glass Microfluidic Chips covers depth control +/-1 um, isotropic profile. Prototypes ship in 5-10 working days.
Every chip project starts with a channel layout. Send DXF or GDSII and etched glass microfluidic chips come back as quoted geometry – depth control +/-1 um, isotropic profile.
Specification envelope
| Microfluidic capability | depth control +/-1 um, isotropic profile |
|---|---|
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Specification advice
Before sending the RFQ, check these against your drawing:
- Channel cross-sections are process-specific: etched channels are lens-shaped, machined ones rectangular with corner radii. State which your CFD model assumed.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Where these parts end up
etched glass microfluidic chips shows up across microfluidic devices (chips, manifolds, via plates, bonded stacks); oled packaging (cover lids, frit-seal frames, fill-port plates); aerospace optics (sensor windows, star-tracker flats, radiation-tolerant ports).
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Related reading on this site: custom ITO glass, Borofloat 33 selection guide, high-purity quartz guide.
Frequently asked questions
What files do you need for a quote?
A dimensioned PDF plus DXF or STEP geometry. If only a sketch exists, our drawing review service formalizes it before quoting.
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
Is there a minimum order for etched glass microfluidic chips?
No. Single prototypes are accepted, and pricing steps down at 10, 100 and 1,000 pieces.
How fast can prototypes ship?
Machined prototypes ship in 5 – 10 working days. Coated or bonded parts add 1 – 2 weeks depending on queue slots.
Specifications on this page were last reviewed by our engineering team in August 2026.