Quartz Glass Glass Wafers – Quartz Glass (CTE 0.59 x 10^-6 /K, 260 nm – 2.5 um). No minimum order; DFM review included with every RFQ.
A wafer is a specification bundle, not just a disc. quartz glass glass wafers here mean GE214-equivalent, semiconductor grade material with certified CTE of 0.59 x 10^-6 /K, TTV controlled per format, and edges profiled for handler compatibility.
The numbers
| Material | Quartz Glass (GE214-equivalent, semiconductor grade) |
|---|---|
| Thermal expansion (CTE) | 0.59 x 10^-6 /K |
| Service temperature | 1,050 C continuous |
| Transmission range | 260 nm – 2.5 um |
| Density | 2.20 g/cm3 |
| Knoop hardness | 500 kg/mm2 |
| Refractive index | 1.459 @ 587 nm |
| Stock thickness | 0.20 – 60 mm |
| Maximum blank size | 450 mm diameter |
| Wafer formats | 2", 3", 4", 6", 8" and 12" with SEMI flats or notch |
| TTV | under 3 – 5 um by format |
| RFQ inputs | PDF/DXF/STEP drawing, quantity brackets, surface and edge spec |
Getting the drawing right
Before sending the RFQ, check these against your drawing:
- Material note: natural-quartz batches vary in metallic ppm, so semiconductor lots need certs per melt.
- Over-specification is the quiet budget killer: a 20/10 scratch-dig face costs roughly three times an 80/50 face, so grade each surface individually.
For the complete framework, see the tolerance design guide and the holes and edges design guide.
Manufacturing capability
One material, many routes: on Quartz Glass we also quote edge grinding, dicing, coring, cnc machining, and multi-step drawings are the norm rather than the exception.
Where these parts end up
Orders for quartz glass glass wafers cluster in semiconductor equipment (view ports, wafer carriers, plasma rings, chamber windows); laboratory instruments (cuvettes, sight glasses, stir-cell windows). Background reading on the underlying material science: ScienceDirect: quartz glass.
The fastest route to a quote is geometry: use the 3D builder below, draw a dimensioned 2D drawing from it, or open the site-wide custom glass machining 3D + 2D builder for fully custom parts.
Related reading on this site: high-temperature quartz windows, high-purity quartz guide, laser glass cutting.
Common questions
Do parts ship with inspection data?
Dimensional reports, surface certificates and material certs per melt are available; specify the level on the RFQ.
What tolerances are achievable on Quartz Glass parts?
Ground features hold +/-0.01 mm and lapped thickness reaches +/-0.003 mm. Natural-quartz batches vary in metallic ppm, so semiconductor lots need certs per melt.
What thickness range do you stock for Quartz Glass?
Standard stock spans 0.20 – 60 mm, with blanks up to 450 mm diameter. Other formats are sourced per order.
How does Quartz Glass behave under heat?
CTE is 0.59 x 10^-6 /K and continuous service reaches 1,050 C continuous, which is what drives its use where fused from natural quartz crystal matters.
Specifications on this page were last reviewed by our engineering team in October 2026.